Adjustable: All settings are adjustable and are stored in a non volatile memory.

Display: User friendly alphanumeric LCD gives you words to explain the numbers.

Energy Metering: Shows daily charge and discharge amp hours.

Three Step Regulation: Boost, Absorption and Float modes with an optional periodic Equalisation mode. Can switch in series, shunt, or series + shunt modes.

History: Records change and load amp hours, max and min battery voltages and state of charge for the last 30 days. Remembers how much was really collected and used.

Generator Control: A sophisticated generator controller is included with four different modes of control available and a quiet time operation.

Event Control: A versatile event controller allows the load to be turned on or off under a user selected set of conditions. Can be used for lighting, pumping, frost control, etc.

Alarm: There is an adjustable low or high battery voltage alarm.

Second Battery: When the main battery is full, use the waste energy to charge an auxilary battery. The PL supplies a signal to switch a relay to the second battery.

Remote Control: A computer can communicate with the PL using the PLI RS232 interface. Data can be downloaded and settings adjusted from far away.

Protection: Protected against short circuit, reverse flow, lightning. Low battery load disconnect function built in. Current limit over heat or over current. Conformal coating applied to protect against corrosion.

External Shunts: Two external shunts can be connected using the DC isolated PLS adaptor.

Nominal System Voltages: 12, 24, 32, 36, 48 Volts
Solar Charge Current Maximum: 40 Amps
Load Switch Current Maximum: 7 Amps
Voltage Drop at Rated Current: 0.4 Volts
Operating Ambient Temperature Range: -20 to +55°C
Supply Current: 13 mA
Battery Temperature Sensor Range: -50 to +50°C
Regulation Set Points: 4 set programs else user adjust
Dimensions: 130(H) x 124(W) x 50(D) mm
Weight: 515 grams

Price: $440